Brink Gereedschappen - Gereedschappen en machines
ii   







Home >> Hameg >> Accessoires

Catalogus Accessoires:



529.HAMEGComplete Hameg Catalogus
Download hier de complete Hameg catalogus en vraag uw prijs bij ons aan. Dit kan telefonisch of via e-mail verkoop@brinktechniek.nl

Volledige Hameg catalogus 2013
Prijs op aanvraag





529.HZ100Hameg HZ100 Differential probe 20:1 / 200:1
Hameg HZ100 Differential probe 20:1 (30 MHz) / 200:1 (40 MHz).
Prijs op aanvraag





529.HZ109Hameg HZ109 Differential probe 1:1 / 1:10
Hameg HZ109 Differential probe 1:1(20 MHz) / 10:1 (30 MHz).
Prijs op aanvraag





529.HZ10RHameg HZ10R setje meetsnoeren 1 meter rood
Hameg HZ10R set of sillicon test leads banana tot banana. 1 meter. Set of 5 pcs. red.
Prijs op aanvraag





529.HZ10SHameg HZ10S setje meetsnoeren 1 meter zwart
Hameg HZ10S set of sillicon test leads banana tot banana. 1 meter. Set of 5 pcs. black.
Prijs op aanvraag





529.HZ115Hameg HZ115 Differential probe 100:1 / 1000:1
Hameg HZ115 Differential probe 100:1 (20 MHz) / 1000:1 (30 MHz).
Prijs op aanvraag





529.HZ13Hameg HZ13 Interface cable USB 1,8 m.
Hameg HZ13 Interface cable USB 1,8 m.
Prijs op aanvraag





529.HZ14Hameg HZ14 Interface cable serial 1,8 m.
Hameg HZ13 Interface cable serial 1,8 m. sub-d 9pin 1:1
Prijs op aanvraag





529.HZ15Hameg HZ15 meetsnoer probe/banana
Hameg HZ15 sillicon testlead with test probe (black and red) and shealted banana plug.
Prijs op aanvraag





529.HZ154Hameg HZ154 Standard probe 1:1/10:1 (10/100 MHz)
Hameg HZ154 Standard probe 1:1/10:1 (10/100 MHz)
Prijs op aanvraag





529.HZ16Hameg HZ16 Test lead BNC to 2 mini hooks
Hameg HZ16 Test lead BNC to 2 mini hooks
Prijs op aanvraag





529.HZ17Hameg HZ17 4-wire test lead with probe tips
Hameg HZ17 4-wire test lead with probe tips. 5-pin DIN connector for HM8018.
Prijs op aanvraag





529.HZ18Hameg HZ18 Kelvin probe with goldplated contacts f
Hameg HZ18 Kelvin probe with goldplated contacts for HM 8018
Prijs op aanvraag





529.HZ181Hameg HZ181 4 wire test adaptor for THT components
Hameg HZ181 4 wire test adaptor for THT components incl. shorting plate for HM8118.
Prijs op aanvraag





529.HZ184Hameg HZ184 Kelvin measurement cable for HM8118
Hameg HZ184 Kelvin measurement cable for HM8118
Prijs op aanvraag





529.HZ186Hameg HZ186 Transformator measurement cable for HM
Hameg HZ186 Transformator measurement cable for HM8118
Prijs op aanvraag





529.HZ188Hameg HZ188 4 wire SMD adaptor for HM8118
Hameg HZ188 4 wire SMD adaptor for HM8118
Prijs op aanvraag





529.HZ19Hameg HZ19 SMD tweezers
Hameg HZ19 SMD tweezers, 4-wire testlead, 5-pin DIN connector for HM8018.
Prijs op aanvraag





529.HZ20Hameg HZ20 Adaptor BNC to 4 mm. banana
Hameg HZ20 Adaptor BNC to 4 mm. banana
Prijs op aanvraag





529.HZ200Hameg HZ200 Probe 10:1 (250 MHz) with auto attenua
Hameg HZ200 Probe 10:1 (250 MHz) with auto attenuation 1 piece.
Prijs op aanvraag





529.HZ200DHameg HZ200D Probe 10:1 (250 MHz) with auto attenu
Hameg HZ200D Probe 10:1 (250 MHz) with auto attenuation 2 pieces.
Prijs op aanvraag





529.HZ21Hameg HZ21 Adaptor N (plug) - BNC (socket)
Hameg HZ21 Adaptor N (plug) - BNC (socket)
Prijs op aanvraag





529.HZ22Hameg HZ22 50 Ohm termination
Hameg HZ21 Adaptor N (plug) - BNC (socket)
Prijs op aanvraag





529.HZ24Hameg HZ24 Attenuator set
Hameg HZ24 Attenuator set 50 Ohm (4 pcs.) 3/6/10/20 dB (1 GHz) + 1 pc. HZ22
Prijs op aanvraag





529.HZ26Hameg HZ26 BNC-T-adaptor UG27 - 50 Ohm.
Hameg HZ26 BNC-T-adaptor UG274 - 50 Ohm.
Prijs op aanvraag





529.HZ27Hameg HZ27 Adaptor BNC socket to BNC socket
Hameg HZ27 Adaptor BNC socket to BNC socket
Prijs op aanvraag





529.HZ31Hameg HZ31 Coaxial cable BNC/BNC
Hameg HZ31 Coaxiaal cable BNC/BNC 1 meter, elbow.
Prijs op aanvraag





529.HZ32Hameg HZ32 Coaxal cable BNC to banana plugs 1 mete
Hameg HZ32 Coaxial cable BNC to banana plugs 1 meter
Prijs op aanvraag





529.HZ33Hameg HZ33 Coaxial cable BNC/BNC 0,50 meter
Hameg HZ33 Coaxial cable BNC/BNC 0,50 meter
Prijs op aanvraag





529.HZ33SHameg HZ33S Coaxial cable BNC/BNC 0,50 meter insul
Hameg HZ33S Coaxial cable BNC/BNC 0,50 meter insulated
Prijs op aanvraag





529.HZ34Hameg HZ34 Coaxial cable BNC/BNC
Hameg HZ34 Coaxial cable BNC/BNC 1 meter
Prijs op aanvraag





529.HZ34SHameg HZ34S Coaxial cable BNC/BNC 1 meter insulate
Hameg HZ33S Coaxial cable BNC/BNC 1 meter insulated
Prijs op aanvraag





529.HZ350Hameg HZ350 Probe 10:1
Hameg HZ350 Probe 10:1 Attenuation ratio: 10:1 Bandwidth: 350MHz Rise time: 1.0 ns Input impedance: 10MO II 12 pF Max. Voltage: 400 V (DC + peak AC) LF compensation: 1 Trimmer RF compensation: 2 Trimmer Cable length: 1.2 m Probe factor identification: automatically after plugging Measuring category: CAT I
Prijs op aanvraag





529.HZ355Hameg HZ355 Probe 10:1 500 MHz
Hameg HZ355 Probe 10:1 500 MHz Attenuation ratio: 10:1 Bandwidth: 500MHz Rise time: 700 ps Input impedance: 10MO II 9.5 pF Max. Voltage: 400 V (DC + peak AC) LF compensation: 1 Trimmer RF compensation: 2 Trimmer Cable length: 1.3 m Probe factor identification: automatically after plugging Measuring category: CAT I
Prijs op aanvraag





529.HZ42Hameg HZ42 19
Hameg HZ42 19"rackmount kit 2U

For mounting HAMEG instruments with a case height of 75mm (for Series 8100, HM8143, HM7042-5, HM8001-2, HMP2020, HMP2030 and Series HMF).

Dimensions: W440, D360
2 RU: 88mm
Prijs op aanvraag





529.HZ43Hameg HZ43 19
Hameg HZ43 19"rackmount kit 3U for: HM2005, HM303-6, HM504-2, HM507, HM5510, HM5014-2, HM5530, HM7044.
Prijs op aanvraag





529.HZ45Hameg HZ45 19
Hameg HZ45 19"rackmount kit 4U for: HM1000, HM1000-2, HM1008, HM1008-2. HM1500, HM1500-2. HM1508, HM1508-2, HM1500-2. HM2005-2 and HM2008
Prijs op aanvraag





529.HZ46Hameg HZ46 19
Hameg HZ46 19"rackmount kit 4U for: For mounting HAMEG instruments with a case height of 175mm (for Series HMO and HMS). Dimensions (W x D): 440 x 170mm plus overhang of the instrument 4 RU: 177mm
Prijs op aanvraag





529.HZ51Hameg HZ51 Probe 10:1 (150 MHz)
Hameg HZ51 Probe 10:1 (150 MHz)
Prijs op aanvraag





529.HZ52Hameg HZ52 Probe 10:1 RF (250 MHz)
Hameg HZ52 Probe 10:1 RF (250 MHz)
Prijs op aanvraag





529.HZ53Hameg HZ53 Probe 100:1 (100 MHz)
Hameg HZ53 Probe 100:1 (100 MHz)
Prijs op aanvraag





529.HZ547Hameg HZ547 3GHz VSWR Test Unit
Hameg HZ547 3GHz VSWR Test Unit This unit is used to measure the voltage standing wave ratio (VSWR) and the reflection coefficient of a device under test with an impedance of 50 O. Typical test objects include attenuators, terminations, frequency switches, amplifiers, cables and mixers. The measurement range is specified from 150 kHz1GHz/100 kHz3 GHz. Technical specifications (temperature range from +10C to +45C) Frequency range: 100 kHz3GHz Impedance: 50O Directivity: 28 dB (100 kHz300 kHz) 35 dB (300 kHz1 GHz) 30 dB (1 GHz...2.8 GHz) 28 dB (2.8 GHz...3 GHz) Reflection loss at DUT port: 20dB Insertion loss INt OUT: 19 dB (100 kHz300 kHz) INt OUT: 17 dB (300 kHz3 GHz) INt DUT: 1.7dB DUTt OUT: 16dB Max. Power Dissipation: +26dBm Connectors: N (female) Dimensions: (W x H x D), without connectors) 150 x 68 x 29.5mm Weight: approx. 650 g Temperature range: +10 C+45 C Accessories supplied: HZ525 (Termination 50 O 1W), N male to N male (2 ea.) Carrying case (265 x 225 x 50 mm WxHxD)
Prijs op aanvraag





529.HZ56-2Hameg HZ56-2 current probe
Hameg HZ56-2 current probe

Let op! De HZ56-2 wordt vervangen door de HZO50
Dit artikel is niet meer leverbaar.



529.HZ560Hameg HZ560 Transient Limiter
Hameg HZ560 Transient Limiter The HZ560 Transient Limit protects the input circuits of spectrum analyzers and test receivers. The input of the Transient Limiter is connected via BNC cable to the signal source. The output can be connected directly to the spectrum analyzer. Technical specifications at 23C 2C Frequency range: 150 kHz - 30 MHz Feed-through attenuation: f = 150 kHz 30 MHz a = 10 dB + 1.5 / -0.5 dB at f < 1 kHz a is > 90 dB at f > 100 MHz a is > 50 dB Max. input power: 2 W (average) (+33 dBm) Max. input voltage: 50 V DC VSWR: 1.5:1 or better Connections: BNC (input and output) Dimensions: 67 x 32 x 32 mm
Prijs op aanvraag





529.HZ57Hameg HZ57 replacement cable for HZ51, HZ54
Hameg HZ57 replacement cable for HZ51, HZ54
Prijs op aanvraag





529.HZ575Hameg HZ575 75 to 50 Ohm Converter
Hameg HZ575 75 to 50 Ohm Converter HZ575 is a 75 Ohm to 50 Ohm converter enabling measurement in 75 Ohm systems in connection with 50 Ohm input impedance spectrum analyzers. The 75 Ohm input is a 75 Ohm BNC socket which is AC coupled internally. The output is a 50 Ohm N male connector which is DC coupled. HZ575 can also be used for reverse operation converting 50 Ohm to 75 Ohm. Technical specifications Frequency range: 5 MHz 1.2 GHz Insertion loss: less than 1 dB Max. Level/Voltage at 75 ? connector: +10 dBm / 20 VDC Max. Level/Voltage at 50 ? connector: +10 dBm / 0 VDC Dimensions: 25 x 25 x 58 mm (W x H x D) Weight: 100 g
Prijs op aanvraag





529.HZ70Hameg HZ70 Optical interface
Hameg HZ70 Optical interface incl. fibre optic cable 4m.
Prijs op aanvraag





529.HZ72Hameg HZ72 GPIB Cable 2m. angled, stackable
Hameg HZ72 GPIB Cable 2m. angled, stackable
Prijs op aanvraag





529.HZ809Hameg HZ809 Test Adapter for Modular System 8000
Hameg HZ809 Test Adapter for Modular System 8000 Test adapter for the testing and repair of insert modules for Modular System 8000 outside the basic mainframe unit HM8001-2. The module connection terminals in the basic unit HM8001-2 are pulled out 1 to 1. The insert modules can then be operated outside the unit while the housing is open.
Dit artikel is niet meer leverbaar.



529.HZ812Hameg HZ812 Temperature Probe PT100
Hameg HZ812 Temperature Probe PT100 The HZ812 Temperature Probe is an immersion sensor with a platinum test resistance of PT 100. It ensures excellent precision over a broad temperature range. The probe is of robust construction, waterproof and also suitable for use in air or dusty environments. The technical specifications apply for immersion depths of at least 60 mm. The probe is connected device under test is either with a 2-pole connection using a grounded plug. The length of the connector cable is 1.2 m. Technical specifications in accordance with EN60751 (formerly IEC751): Probe diameter: 4 mm Measurement range: -50C to +400C Accuracy, Class A: (0,2% reading +0,15C) t99 (s): 12s Connection: Safetysockets 4 mm, 1,2m PVC-Kabel Accuracy, HZ812 in combination with HM8012: -50c < T < 200C: (0,2% reading +0,25C) 200C < T < 400C: (0,2% reading +0,45C)
Prijs op aanvraag





529.HZ815Hameg HZ815 Socket adaptor voor HM8115-2 (G)
Hameg HZ815 Socket adaptor voor HM8115-2 (G)
Prijs op aanvraag





529.HZ83Hameg HZ83 Thermopaper 5 rolls/pack
Hameg HZ83 Thermopaper 5 rolls/pack
Prijs op aanvraag





529.HZ887Hameg HZ887 Temperature Probe PT100
Hameg HZ887 Temperature Probe PT100 The HZ887 Temperature Probe is an immersion sensor with a platinum test resistance of PT100. It ensures excellent precision over a broad temperature range. The probe is of robust construction, waterproof and also suitable for use in air or dusty environments. The technical specifications apply for immersion depths of at least 60 mm. The probe is connected to the measuring instrument with a 4-wire connector via 4 mm banana plugs. The length of the connector cable is 1.2 m. Technical specifications in accordance with EN60751 (formerly IEC751): Probe diameter: 4 mm Measurement range: -50C to +400C Accuracy, Class A: (0,2% reading +0,15C) t99 (s): 12 s (time required to display 99% of temperature change) Connection: 4 mm banana plugs
Prijs op aanvraag





529.HZO50Hameg AC/DC Current Probe 30A
Hameg AC/DC Current Probe 30A
Measurement range: 20 Arms/30App
Accuracy: 1% from measurement value 2mA
Bandwidth: DC100 kHz (0,5 dB)
Resolution: 1mA
Output voltage: 100mV/A
Load impedance: 100 kΩ II ≤ 100 pF
Max. Voltage: 300 Veff or DC
Output cable/Connector: 2m (50Ω)/BNC
Measuring category: CAT III
Dit artikel is niet meer leverbaar.










Share |


Volg ons op Twitter
, .